Implement transformation modules

The prerequisite of connecting Memgraph to a Kafka stream is to have a transformation module that can produce Cypher queries based on the received messages. We are going to implement a simple transformation that stores the properties of each message in a vertex.

note

For detailed technical information on transformation modules, check out the reference guide.

Using Docker with transformation modules

If you are using Docker to run Memgraph, you will have to create a volume and mount it to access the query_modules directory. Yes, query_modules , because Memgraph can load transformations and query procedures from the same directory, even from the same module. Mounting a volume can be done by creating an empty directory modules and executing the following command:

docker volume create --driver local --opt type=none --opt device=modules --opt o=bind modules

Now, you can start Memgraph and mount the created volume:

docker run -it --rm -p 7687:7687 -p 3000:3000 -v modules:/usr/lib/memgraph/query_modules memgraph

Everything from the directory /usr/lib/memgraph/query_modules will be visible/editable in your mounted modules volume and vice versa.

Through the rest of this page, /usr/lib/memgraph/query_modules will be used to refer to this directory. If you are using Docker, then please do the same but with the recently created modules directory.

Python API

Transformations can be implemented using the Python API provided by Memgraph. If you wish to write your own transformation using the Python API, you need to have Python version 3.5.0 or above installed.

Let's create a file called transformation.py in the /usr/lib/memgraph/query_modules directory. First and foremost, import the mgp module, which contains definitions of the public Python API provided by Memgraph.

import mgp

Next, we have to implement the function that does the transformation. For transformations, the return type is fixed, while the parameters of the transformation can vary. The whole signature of a transformation is the following:

import mgp

@mgp.transformation
def my_transformation(context: mgp.TransCtx,
                      messages: mgp.Messages
                      ) -> mgp.Record(query=str, parameters=mgp.Nullable[mgp.Map]):
    ...

We also marked our function as a transformation so it will be recognized by Memgraph when the module is loaded. This was done by adding the @mgp.transformation decorator.

The transformations can slightly deviate from this by not receiving the context , just the messages :

import mgp

@mgp.transformation
def my_transformation(messages: mgp.Messages
                      ) -> mgp.Record(query=str, parameters=mgp.Nullable[mgp.Map]):
    ...

As this simple transformation won't access the vertices and edges in the database, the context parameter is not necessary, so we are going to use the simpler version.

The most important part is the actual implementation of the transformation function. Before showing how it can be done, let's clarify what it is supposed to do: it receives a list of messages and returns some queries and their parameters that will be executed in Memgraph as any regular query. Right, let's see how we can do that!

We have to iterate over the messages and construct a query for each of them:

import mgp

@mgp.transformation
def my_transformation(messages: mgp.Messages
                      ) -> mgp.Record(query=str, parameters=mgp.Nullable[mgp.Map]):
    result_queries = []

    for i in range(messages.total_messages()):
        message = messages.message_at(i)
        payload_as_str = message.payload().decode("utf-8")
        result_queries.append(mgp.Record(
            query="CREATE (n:MESSAGE {{timestamp: '{timestamp}', payload: '{payload}', topic: '{topic}'}})".format(
                timestamp=message.timestamp(), payload=payload_as_str, topic=message.topic_name()),
            parameters=None))

    return result_queries

As you can see, the query is almost the same for every message, except the three properties of the messages. This is exactly the case when the parameters field of the result is handy. Instead of formatting the string with the properties, we can pass the properties as query parameters:

import mgp

@mgp.transformation
def my_transformation(messages: mgp.Messages
                      ) -> mgp.Record(query=str, parameters=mgp.Nullable[mgp.Map]):
    result_queries = []

    for i in range(messages.total_messages()):
        message = messages.message_at(i)
        payload_as_str = message.payload().decode("utf-8")
        result_queries.append(mgp.Record(
            query="CREATE (n:MESSAGE {timestamp: $timestamp, payload: $payload, topic: $topic})",
            parameters={"timestamp": message.timestamp(),
                        "payload": payload_as_str,
                        "topic": message.topic_name()}))

    return result_queries

The $timestamp , $payload and $topic are the placeholders for parameters with the same name.

Congratulations, you just created your first transformation procedure! To ensure that Memgraph can find the transformation, let's reload the modules:

CALL mg.load_all();

And list all the available transformations:

CALL mg.transformations() YIELD *;

You should see something like the following:

+------------------------------------+
| name                               |
+------------------------------------+
| "transformation.my_transformation" |
+------------------------------------+

C API

Transformations can also be implemented in C/C++ using the C API provided by Memgraph. Such modules need to be compiled to a shared library so that they can be loaded when Memgraph starts. This means that you can write the transformations in any programming language which can work with C and can be compiled to the ELF shared library format.

In this chapter, we assume that Memgraph is installed on a standard Debian or Ubuntu machine where the necessary header file can be found under /usr/include/memgraph . For other installations, the header file can be found under the include/memgraph folder in the Memgraph installation directory.

As we already discussed how transformations work in the Python example, we won't go over the transformation itself in detail. Also, to keep the complexity of this example low, this transformation doesn't use the query parameters. Apart from that, this transformation does the same as the Python example, but written in C++17.

So let's create c_transformation.cpp and start to populate it!

#include <exception>
#include <string>
#include <string_view>

#include "mg_procedure.h"

const std::string query_part_1{"CREATE (n:MESSAGE {timestamp: '"};
const std::string query_part_2{"', payload: '"};
const std::string query_part_3{"', topic: '"};
const std::string query_part_4{"'})"};

std::string create_query(const mgp_message &message) {
  return query_part_1 + std::to_string(mgp_message_timestamp(&message)) +
         query_part_2 +
         std::string{mgp_message_payload(&message),
                     mgp_message_payload_size(&message)} +
         query_part_3 + mgp_message_topic_name(&message) + query_part_4;
}

void my_c_transformation(const struct mgp_messages *messages,
                         const struct mgp_graph *, struct mgp_result *result,
                         struct mgp_memory *memory) {

  auto *null_value = mgp_value_make_null(memory);
  try {
    auto messages_size = mgp_messages_size(messages);
    for (auto i = 0; i < messages_size; ++i) {
      auto *message = mgp_messages_at(messages, i);
      auto query = create_query(*message);
      auto *record = mgp_result_new_record(result);
      auto *query_value = mgp_value_make_string(query.c_str(), memory);
      auto record_inserted =
          mgp_result_record_insert(record, "query", query_value) != 0;
      mgp_value_destroy(query_value);
      if (!record_inserted) {
        mgp_result_set_error_msg(result, "Couldn't insert field");
        break;
      }
      record_inserted =
          mgp_result_record_insert(record, "parameters", null_value) != 0;
      if (!record_inserted) {
        mgp_result_set_error_msg(result, "Couldn't insert field");
        break;
      }
    }
    mgp_value_destroy(null_value);
  } catch (const std::exception &e) {
    mgp_value_destroy(null_value);
    mgp_result_set_error_msg(result, e.what());
    return;
  }
}

Now we have to register the transformation in the mgp_init_module function:

extern "C" int mgp_init_module(mgp_module *module, mgp_memory *memory) {
  return mgp_module_add_transformation(module, "my_c_transformation",
                                       my_c_transformation) == 0;
}

Now let's compile it:

clang++ --std=c++17 -Wall -shared -fPIC -I /home/kovi/data/memgraph/include c_transformation.cpp -o c_transformation.so

After copying the resulting c_transformation.so to the /usr/lib/memgraph/query_modules directory, we can reload the modules and check if Memgraph found our newly created transformation:

CALL mg.load_all();

Then the transformation should show up in the list of transformations:

CALL mg.transformations() YIELD *;

You should see something like this:

+----------------------------------------+
| name                                   |
+----------------------------------------+
| "c_transformation.my_c_transformation" |
| "transformation.my_transformation"     |
+----------------------------------------+

For a more detailed overview, check out the Reference guide.